Order call

Your name

Your Phone Number

×
ask a Question

Your Name

Your email address

Message

Attach file

×
USA: +17139362940;    Hong-Kong: +85258014479;    Russia: +78124253608
rus | eng

Crosslinkers

CROSSLINKER 10 Crosslinker

SUPERCROSS 10 is a self-buffering, highly efficient and cost effective borate-based crosslinker for fracturing fluids based on guar or derivitized guar. It requires no pH control additives (as it contains pH control agents) and thus is an economical and easy to use product for any application where an instant gel activator is desired or required. SUPERCROSS 10 contains no carbonates which can cause precipitation of solids in high-calcium waters. SUPERCROSS 10 is recommended as a fracturing fluid activator and buffering agent for applications below 250°F fluid temperatures. Recommended dosage levels range from 0.5 — 2.0 gal of SUPERCROSS 10 per 1000 gal of base fluid for a 20 — 30 lbs/Mgal guar base gel.

 

SUPERCROSS D1 Crosslinker

SUPERCROSS D1 is a time delayed borate crosslinker for guar-based fracturing fluids. Delayed crosslinking means less initial friction pressure and therefore less power needed to pump fracturing fluid. SUPERCROSS D1 comes in the form of environmentally friendly liquid slurry for ease of use. This product allows for the adjustment of the gel crosslinking time by manipulating the pH and activator loadings. Gel Crosslinking Time 1:00 – 2:00 minutes (20 ppt guar loading, 2.00 gpt SUPERCROSS D1, 75°F).

 

SUPERCROSS D2 Crosslinker

SUPERCROSS D2 is a time delayed borate crosslinker for guar-based fracturing fluids. Delayed crosslinking means less initial friction pressure and therefore less power needed to pump fracturing fluid. SUPERCROSS D2 comes in the form of environmentally friendly liquid slurry for ease of use. This product allows for the adjustment of the gel crosslinking time by manipulating the pH and activator loadings. Gel Crosslinking Time 1:30 – 3:00 minutes (25 ppt guar loading, 1.75 gpt SUPERCROSS D2, 100°F).

 

SUPERCROSS D3 Crosslinker

SUPERCROSS D3 is a time delayed borate crosslinker for guar-based fracturing fluids. Delayed crosslinking means less initial friction pressure and therefore less power needed to pump fracturing fluid. SUPERCROSS D3 comes in the form of environmentally friendly liquid slurry for ease of use. This product allows for the adjustment of the gel crosslinking time by manipulating the pH and activator loadings. Gel Crosslinking Time 2:00 – 4:00 minutes (25 ppt guar loading, 1.75 gpt SUPERCROSS D3, 100°F).

 

SUPERCROSS Z1 Crosslinker

SUPERCROSS Z1 is an aqueous zirconium oxychloride-based crosslinker in an alcohol solution that is highly efficient and cost effective for fracturing fluids based on guar and derivitized guar. It works in a pH range of 4.0 – 11.0 and temperatures up to 400°F, thus making is useful for a broad range of applications. SUPERCROSS Z1 is also fully compatible with all common breaker systems. SUPERCROSS Z1 will activate instantly at any pH at or above 9.0 and will have a delay at any pH below 9.0. SUPERCROSS Z1 is typically added on the fly, at recommended dosage levels ranging from 0.50 — 1.00 gal per 1000 gal of base fluid, and at pH levels ranging from 4.0 – 11.0, with gel loading ranging from 20 — 50 ppt or higher.

.