Order call

Your name

Your Phone Number

×
ask a Question

Your Name

Your email address

Message

Attach file

×
USA: +17139362940;    Hong-Kong: +85258014479;    Russia: +78124253608
rus | eng

Destructors

BREAK EZ Water gel breaker

BREAK EZ is a powdered enzyme breaker designed to break guar and derivitized guar-based fracturing fluids, as well as cellulose and its derivatives. BREAK EZ is highly effective primarily for linear fluids at low to moderate pH and at temperatures below 160°F. Recommended dosage levels range from 1.0 — 2.0 lbs of BREAK EZ per 1000 galof base fluid. BREAK EZ can also be used in fluids that are up to 50% alcohol based.

 

BREAK MT Water gel breaker

BREAK MT is an encapsulated oxidizing breaker used in hydraulic fracturing applications. Ammonium persulfate slowly releases from BREAK MT when added to a fracturing fluid allowing for delaying the break of the fracturing fluid or allowing increased breaker concentrations in the fluid. This product can be used in applications that with fluid temperatures that range from 140 to 190°F. It breaks guar and derivatized guar based fracturing fluids. Release time is 150 minutes at 170°F. Recommended dosage levels range from 1.0 — 5.0 lbs of BREAK MT per 1000 gal of base fluid.

 

BREAK HT Water gel breaker

BREAK HT is an encapsulated oxidizing breaker used in hydraulic fracturing applications. Ammonium persulfate slowly releases from BREAK HT when added to a fracturing fluid allowing for delaying the break of the fracturing fluid or allowing increased breaker concentrations in the fluid. This product can be used in applications that with fluid temperatures that range from 140 to 190°F. It breaks guar and derivatized guar based fracturing fluids. Release time is 180 minutes at 170°F. Recommended dosage levels range from 0.5 — 2.0 lbs of BREAK HT per 1000 gal of base fluid.

.